Playing A Blu-Ray Disc Player; Cd-Rom (Owner's Manual); Power Cord - Denon AVR-1513 Getting Started

Crossover Freq.
1
ui
Use to select "Crossover Freq.",
and then press ENTER .
Speaker Setup
Speaker Config. Front
Bass Setting Center
Distance Surround
Channel Level
Crossover Freq.
ENTER Enter BACK Return
Crossover Freq.
1
Front 80Hz
Center 80Hz
Surround 80Hz
2
ui
Use to select a speaker, and use
o p to select the frequency.
ENTER Enter BACK Return
Front / Center / Surround
Specify crossover frequency for
speaker.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz /
120Hz / 150Hz / 200Hz / 250Hz : Set the
crossover frequency.
SVENSKA SVENSKA NEDErlANDS NEDErlANDS
Default settings are underlined.
• "Crossover Freq." can be set when the "Bass
Setting" – "SW Mode" (vpage 6) setting
is "LFE+Main", or when you have a speaker
that is set to "Small".
• Always set the crossover frequency to "80Hz".
When using small speakers, however, we
recommend setting the crossover frequency to
a higher frequency.
• For speakers set to "Small", sound below the
crossover frequency is cut from the sound
output. The cut bass sound is output from the
subwoofer or front speakers.
• The "SW Mode" setting
determines which speakers can be set.
• If set to "LFE+Main", this setting can be made
regardless of the speaker size.
3
Press ENTER to enter the setting.
Speaker Setup
Speaker Config. Front
Bass Setting Center
Distance Surround
Channel Level
Crossover Freq.
each
4
Press SETUP .
The menu display disappears.
ENTER Enter BACK
ESpAñol ESpAñol portuGuÊS itAliANo

Playing a Blu-ray Disc player

This section explains the basic operations for surround playback using a Blu-ray
Disc player connected to this unit.
For details, see the included CD-ROM (Owner's manual).
1
Blu-ray
Press to switch an input source for a player used for
playback.
2
Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles
setting, etc.) beforehand.
3
Adjust the sound volume.
VOLUME
d/f ···················· Volume up /down
MUTE
: ··········································Muting
(vpage 6)
4
Press SURROUND 0
mode.
The listening mode is displayed on the display or TV screen.
SURROUND 0
• Each time
switched. Select the desired listening mode.
When power is switched to standby
POWER X
Press .
n Power indicator status in standby mode
• Power on : Green
• Normal standby : Off
Return
• Standby when "Standby Pass" (vm page 35)
is not set to "OFF" : Red
NOTE
During power standby, a minimal amount of power is
consumed. To totally cut off the power, remove the
power cord from the power outlet.
See the following items on the included CD-ROM (Owner's manual).
n Playing a Blu-ray Disc player/DVD player
n Playing a portable player
n Tuning in radio stations
FrANçAiS ESpAñol FrANçAiS DEutSch
or SURROUND 1 to select a listening
SURROUND 1
or is pressed, the listening mode is
GConnecting a Blu-ray Disc playerH
Blu-ray Disc player
HDMI
OUT
Other operations
n Convenient functions
n How to make detailed settings
ENGliSh ENGliSh
POWER
QUICK SELECT
1 2 3 4
CBL /SAT DVD MEMORY BAND
Blu-ray GAME SHIFT MODE
AUX
INFO AUDIO
VOLUME
ENTER
BACK SETUP
NIGHT RESTORER TONE MUTE
SURROUND AUDIO DELAY
HDMI
cable
(sold separately)
8 8