Denon AVR-1513 Getting Started page 4

ENGliSh FrANçAiS
Preparation
Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities
on the speakers being connected to the this unit, and be sure to interconnect the
channels and polarities correctly.
Connecting the speaker cables
Peel off about 10 mm of sheathing from the tip
of the speaker cable, then either twist the core
wire tightly or terminate it.
3
ESpAñol portuGuÊS ESpAñol
NOTE
• Disconnect this unit's power plug from the
power outlet before connecting the speakers.
Also, turn off the subwoofer.
• Connect so that the speaker cable core wires
do not protrude from the speaker terminal.
The protection circuit may be activated if the
core wires touch the rear panel or if the +
and – sides touch each other (vm page 53
"Protection Circuit").
• Never touch the speaker terminals while the
power supply is connected. Doing so could
result in electric shock.
• Use speakers with the speaker impedances
shown below.
Speaker
Speaker terminals
impedance
FRONT
CENTER 6 – 16 Ω
SURROUND
NEDErlANDS SVENSKA
FL
SW
SL
Connect
FR
C
SR