FujiFilm X-T1 Owner's Manual page 71

2
Select one of the following options using a function button (P 40; at default settings, bracketing
program selection is assigned to the Fn1 button) or the shooting menu (P 77).
Option Option
Select a bracketing amount. Each time the shutter button is pressed, the camera will take three shots:
one using the metered value for exposure, the second overexposed by the selected amount, and the third
AE BKT AE BKT
underexposed by the same amount (regardless of the amount selected, exposure will not exceed the limits
of the exposure metering system).
Select a bracketing amount. Each time the shutter is released, the camera will take a picture at the current
sensitivity (P 50) and process it to create two additional copies, one with sensitivity raised and the other
ISO BKT ISO BKT
with sensitivity lowered by the selected amount (regardless of the amount selected, sensitivity will not
exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION FILM SIMULATION Select a bracketing type. Each time the shutter is released, the camera takes one shot and processes it to
BKT BKT create copies with the selected fi lm simulation settings (P 42).
Each time the shutter button is pressed, the camera takes three shots with diff erent dynamic ranges (P 79):
DYNAMIC RANGE DYNAMIC RANGE 100% for the fi rst, 200% for the second, and 400% for the third. While dynamic range bracketing is in eff ect,
BKT BKT sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in eff ect is restored when
bracketing ends.
Select a bracketing amount. Each time the shutter button is pressed, the camera takes three shots: one at
WHITE BALANCE WHITE BALANCE
the current white balanced setting, one with fi ne-tuning increased by the selected amount, and another
BKT BKT
with fi ne-tuning decreased by the selected amount.
3
Take photographs.
Description Description
The DRIVE Dial
55