FujiFilm X-T1 Owner's Manual page 137

Problem Problem
• • The camera is not properly connected The camera is not properly connected: Connect the camera properly (
nected, pictures will be displayed on the TV instead of in the camera monitor. nected, pictures will be displayed on the TV instead of in the camera monitor.
No picture or sound on TV. No picture or sound on TV.
• • Input on the television is set to "TV" Input on the television is set to "TV": Set input to "HDMI".
• • The volume on the TV is too low The volume on the TV is too low: Use the controls on the television to adjust the volume.
The computer does not The computer does not
Be sure the camera and computer are correctly connected ( Be sure the camera and computer are correctly connected (P
recognize the camera. recognize the camera.
Can not transfer RAW or Can not transfer RAW or
Use the bundled software to transfer pictures ( Use the bundled software to transfer pictures (P
JPEG fi les to computer. JPEG fi les to computer.
Pictures can not be Pictures can not be • • The camera is not properly connected The camera is not properly connected: Connect the camera correctly (
printed. printed. • • The printer is off The printer is off : Turn the printer on.
Only one copy is printed/ Only one copy is printed/
The printer is not PictBridge compatible. The printer is not PictBridge compatible.
the date is not printed. the date is not printed.
The camera is unrespon- The camera is unrespon- • • Temporary camera malfunction Temporary camera malfunction: Remove and reinsert the battery (
sive. sive. • • The battery is exhausted The battery is exhausted: Charge the battery (
The camera does not func- The camera does not func-
Remove and reinsert the battery (P Remove and reinsert the battery (
tion as expected. tion as expected.
No sound. No sound. Turn silent mode off (P Turn silent mode off (
: Connect the camera properly (P
: Set input to "HDMI".
: Use the controls on the television to adjust the volume.
P 98). ).
: Connect the camera correctly (P
: Turn the printer on.
: Remove and reinsert the battery (P
: Charge the battery (P P 13) or insert a fully-charged spare battery (
P 14). If the problem persists, contact your FUJIFILM dealer.
14). If the problem persists, contact your FUJIFILM dealer.
P 89).
89).
Solution Solution
P 108). Note that once the camera is con-
). Note that once the camera is con-
P 101). ).
P 103). ).
P 14). 14).
13) or insert a fully-charged spare battery (P
Problems and Solutions
P 14). 14).
121