1
Bonnet S, Tray Panel Assy
1
Remove the bonnet by removing eight screws.
2
Press the
STANDBY/ON button to turn on the power.
3
Press the 0 button to open the tray.
4
Remove the tray panel assy.
5
Press the 0 button to close the tray.
6
Press the
STANDBY/ON button to turn off the power.
2
6
4
3
3
5
Tray panel assy
How to open the tray when the power cannot be on
When the player cannot eject disc tray due to power failure or
any other reason. To open the Tray door use a long thin object
and push the emergency eject hole under the tray panel to eject.
Note: This photograph shows other models.
However, the method is the same.
Emergency eject hole
Input door
Disassembly
5
long thin pole
2
Front Panel Section
1
Remove two screws.
2
Remove four hooks.
3
Remove front panel section.
1
2
2
3
3
1
2
2
Front panel section
44.