Pioneer DVR-210-S Manual page 71

c) The setting is complete when OSD has disappeared.
d) Unplug the power cable.
Reset the recorder to all its factory settings.
1. Make sure that the recorder is on.
2. Press and hold [STOP] key and press [STANDBY/ON] key on the front panel.
e) The recorder turns off with all settings reset.
Enter the Service Mode then confirm the Model Name "DVR-310-S/ KU" or "DVR-510H-S/ KU".
1. Make sure that the recorder is on.
2. Press and hold [ESC] key and press [DISP] key by using the remote control unit for Service.
DVR-310-S/ KUXU
SYSCON : 1.00
ComRev
FirmRev
AppRev
TUFLCON : 1.12 M
4) Notes
a)
After the setting is complete, you CANNOT CLEAR the setting data.
b) Make sure you enter the correct number.
"NG" appears on TV when unsuitable number is pressed.
In this case, please unplug the power cable and plug it in. Then restart the model setting.
Model Name
: 1.1036 $
: 1.2560 $
: 1.3210 $
70.