Pioneer DVR-210-S Manual page 67

∗1 : When a setting value is changed, that value is immediately displayed and is stored in nonvolatile memory.
• Settings made will not be reset to the default settings even if resetting to the factory-preset values is performed.
∗2 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.
[Display in General Setting mode when the channel currently displayed has specific settings]
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON
Threshold : Manual Threshold Level
Threshold Level : 0
This channel is set up
individually.
2. Specific Channel Setting mode
This mode is entered when the DIG/ANA key is pressed in General Setting mode. In this mode, specific settings can be made for up to 12
channels. For channels that do not have specific settings, the settings of General Setting mode are applied.
Display in Specific Channel Setting mode (A picture from the tuner can be viewed using the semitransparent OSD display.)
[Display in Specific Channel Setting mode]
[When specific channel settings have NOT
been made]
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON
Threshold : Manual Threshold Level
Threshold Level : 0
Individual setting state
Input Channel - [ 1CH]
Sync AGC : ---
Threshold : ------
Threshold Level : --h
∗ : setting is the default.
• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (--).
If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are identical to the default settings
or those of General Setting mode.
• The channels to be displayed in "Input Channel" are as follows:
• In a case of line input: L1-L3, DV
• In a case of tuner input: Received channel (a channel to be set in specific channel settings)
*
*
*
General Setting data
*
Specific Channel
Setting data
[When specific channel settings have
been made]
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON
Threshold : Manual Threshold Level
Threshold Level : 2
Individual setting state
Input Channel - [ 1CH]
Sync AGC : ON
Threshold : Manual Threshhold Level
Threshold Level : 3
*
66.