Advertisement
Instruction Manual
Features:
Patent External Focus / Zoom Adjustment Design.
Built-in AES, BLC, AGC, ATW.
Optional IR-Cut Filter & Heater device available.
1/3" Sony CCD, 550TV Lines / 420TV Lines of Resolution
For Vari-Focal Lens: Optional 4~9mm / 9~22mm Auto Iris Vari-Focal Lens.
For Fixed Lens: Optional 4.0mm / 6.0mmm / 8.0mm / 12.0mm Board Lens.
Low Illumination, no color noise.
Weatherproof design, pass IP66 rating.
Dual Voltage AC/DC (12~24)V or AC 99~240V (Switching Power).
Precautions:
Do not point the camera lens toward the sun or other strong light.
Use AC 110V or AC 220V power supply.
Be careful while handling or installing the camera. Do not drop it or subject it to strong shock or
vibration to prevent damages to it.
When using adaptors, be sure to choose the following types:
1)
DC 12V 2A
2)
DC 15V 1.5A
3)
DC 18V 1A
4)
AC 24V 800mA
If extending power cord is necessary, be sure to use the cord with more than 50 cores inside.
Installation Instructions:
To connect the camera's power and video as the following:
1.
Connect AC power on.
2.
Connect the BNC Video Output to the desired video line.
3.
Position the camera on place you desired.
4.
The camera comes set up from the factory. If you need to make minor adjustments, use the
external magnetic controller to adjust focus/zoom. (Only camera with vari-focal lens needs to
adjust the focus.)
5.
It is not recommended to take apart the camera, which will cause possible damage to the
weatherproof function.
1
Advertisement
