Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
¡ß Do NOT use power sources other than those specified.
¡ß Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
Ultra High Resolution Digital Day/Night Camera
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Genie GSDNR-6358
Summary of Contents for Genie GSDNR-6358
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Table Of Contents
¡á Contents Menu Flow Features ¡á Setup Page Menu Precautions ¤ý LENS ¤ý EXPOSURE Components and Accessories ¤ý White Balance (White Bal.) ¤ý SSDR (Super Dynamic Range) Overview ¤ý BACK LIGHT ¤ý DNR3 ¡á Front View ¤ý DAY/NIGHT ¡á Top View ¤ý... -
Page 3: Features
¡á Features Warning ¡á Ultra High Resolution SSDR (Super Dynamic Range) The camera requires periodic inspection. By adopting a diagonal 6mm(1/3") 410,000 For images with high contrast between bright (NTSC) pixel, 470,000(PAL) pixel SONY CCD, and dark spots from difficult lighting conditions Contact an authorised technician to carry out the inspection. -
Page 4: Precautions
¡á Precautions Do not drop the camera and protect Never keep the camera pointed Do not install the camera in Do not install or use the camera in an it from physical shocks. directly at strong light. extreme temperature conditions. environment where the humidity is high. -
Page 5: Components And Accessories
¡á Components and Accessories Overview ¡á Front View ¨è ¨é 1. Ultra High Resolution Colour CCD Camera ¨ç 2. Auto Iris Lens Connector Plug 3. L-Wrench 4. C-Mount Adapter ¨ç Lens protection cap Cover the lens when not in use. ¨è... -
Page 6: Top View
¡á Overview Top View Rear View ¨ë ¨ì ¨í ¨ë ¨ì ¨í ¨ê VIDEO OUT VIDEO OUT IRIS JACK VIDEO IRIS JACK VIDEO ¨î ¨î ¨ï ¨ï POWER POWER ¨ð ¨ñ AC 24V IN DC 12V IN 24VAC / 12VDC 230VAC ¨ë... - Page 7 ¡á Overview Installation Procedures ¡á 3. Remove the cover of the auto iris lens connection plug and solder the ¡á Lens wires to the connector pins inside the plug, as shown below. The camera is supplied without a lens. Lenses, such as auto iris, CS-Mount and C-Mount, can be used.
-
Page 8: Installation Procedures
¡á Installation Procedures When using a CS-Mount lens ¡á Connecting to a monitor Take off the lens protection cap and attach Connect the video output terminal located on the rear of the camera to the CS-Mount lens to the camera by screwing the monitor. -
Page 9: Setup Page Menu
¡á How to Use the Camera ¡á Menu ¡á Settings Settings can be made using the 5 buttons on the rear of the camera. SETUP menu ¤ý DC VIDEO OUT LENS (selection) ¤ýVIDEO ¤ýMANUAL IRIS JACK VIDEO ¤ýBRIGHTNESS ¤ýSHUTTER ¤ýAGC POWER EXPOSURE ¤ýSENS-UP... -
Page 10: Lens
¡á How to Use the Camera - IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the MAIN MENU control speed is too slow or fast, please use this menu to adjust the speed. Select the function using Change the status using 1.LENS the UP or DOWN button. -
Page 11: White Balance (White Bal.)
¡á How to Use the Camera Note EXPOSURE SETUP • If you press the SET button in 'AUTO' mode, You can adjust brightness 1.BRIGHTNESS by increasing or decreasing the shutter speed. (X2~X512) 2.SHUTTER • Note that the higher the zoom level, the brighter the screen, but the more 3.AGC HIGH likely it is that an after-image will appear. -
Page 12: Ssdr (Super Dynamic Range)
¡á How to Use the Camera BACKLIGHT Note • White Balance may not work properly under the following conditions. This camera is designed so that it delivers a distinctive subject and background In this case select the AWC mode. at the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary W-V DSP chip. -
Page 13: Dnr3
¡á How to Use the Camera HLC MASKING AREA MAIN MENU 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.DNR3 7.DAY/NIGHT COLOR HLC ON HLC OFF ¡Ü OFF : Not being used 2. Select a desired mode using the Left and Right buttons. 3. -
Page 14: Special
¡á How to Use the Camera 2. Select a desired mode using the Left and Right buttons according to 2. Select a desired mode using the Up and Down buttons. the picture display you want. SPECIAL ¡Ü COLOUR : The picture is always displayed in colour. ¡Ü... - Page 15 ¡á How to Use the Camera CAMERA TITLE SETUP 4) Use the 4 direction buttons to move Note to a desired letter and select the • As the DIS function uses the digital zoom the camera's resolution will letter by pressing the SET button. decrease.
-
Page 16: Return
¡á How to Use the Camera ¡Ü MOTION DET : 1) When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates 'PRIVACY'. This product has a feature that allows you to observe movement of objects in 8 different 2) Set up the mode using the 4 direction buttons. -
Page 17: Exit
¡á How to Use the Camera Troubleshooting ¡á If you have trouble operating your camera, refer to the following table. ¡Ü LANGUAGE : You can select the menu language according to your If the guidelines do not enable you to solve the problem, contact an requirements. -
Page 18: Troubleshooting
-20¢ª C to + 60¢ª C / 20% to 90% RH Weight Approx. 260g MAINS POWER OPTION - DC12V : GSDNR-6358 MAINS POWER OPTION - Dual Voltage : GSDNR-6358DV Ultra High Resolution Digital Day/Night Camera Ultra High Resolution Digital Day/Night Camera... -
Page 19: Specifications (Ac230V)
¡á Specifications (AC230V) ITEM NTSC AC230V Power Consumption MAX. 4.5W Image Sensor SONY 1/3" Super HAD High Sensitivity Colour CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization INT / LL Frequency... - Page 20 Model : GSDNR-6358 GSDNR-6358DV GSDNR-6358M Ultra High Resolution Digital Day/Night Camera Instruction Guide GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543 www.geniecctv.com...
Need help?
Do you have a question about the GSDNR-6358 and is the answer not in the manual?
Questions and answers