Video Playback - Lorex L200 Series Instruction Manual

VIDEO PLAYBACK

The L200 Series DVR can play previously
recorded video onscreen, while still recording
live video images.
BUTTON DESCRIPTION
PLAY / Playback of previously recorded
PAUSE data / Pauses the data playback
REC Start manually recording / Stop
recording
FF Fast Forward the video playback.
Press the FF button to change
playback speed to 2x, 4x or 8x
speed.
REW Reverses the video playback.
Press the REW button to change
playback speed to 2x, 4x or 8x
speed.
STOP Stops the playback, and returns
to live monitoring mode.
NOTE: A detailed Button description can be
found in the Front Panel section of this
manual.
The video playback can be displayed in Single
(Full Screen) or QUAD. To change the
onscreen display, press the CH1~CH4 buttons
(L204 Series) or the CH1~CH8 buttons to
change the view.
The Date and Time of the video image are
displayed on the lower part of the screen. The
Video Playback speed is also displayed.
BACKUP FUNCTION
There are two methods to backup video data:
•
To a USB flash drive
•
To a Blank CD
NOTE: This DVR does not support video
backup when live recording is occurring.
Recording must be stopped before data
backup can be performed.
USB MEMORY STICK BACKUP
To save video to the USB Memory Stick, the
start and end times for the selection must be
set:
•
Press the ▲▼ buttons to set the
backup starting and ending points
•
The Available Disk Space and copy
size are shown in KB
•
Press the SEARCH button to start the
backup.
NOTE: It is recommended that the size of the
USB Memory Stick is compared against the
Copy Size before starting Backup. If the drive
space is too small, the message "CAPACITY
IS NOT ENOUGH" will appear.
VIDEO PLAYBACK
37