Record Setup; Record Quality; Event Rec Duration; Record Schedule Submenu - Lorex L200 Series Instruction Manual

RECORD SETUP

The Record Setup controls the settings for
Recording for the DVR.
▲▼
Use the arrows to navigate through the
◄►
settings, and the arrows to change the
values. Press the MENU/EXIT button to return
to the previous menu.
RECORD SPEED SUBMENU
The Record Speed Submenu controls the
Frames per second (FPS) used for each
channel.
(L208 Series menu shown)
The total available Frame Rate is 60 FPS.
These frames are shared across all channels,
and can be divided according to channel
importance.
For example, a camera pointed at the front
door may require a higher frame rate (i.e. 15
FPS) than a camera that is monitoring a low
traffic area (i.e. 7 FPS).
System Setup Controls

RECORD QUALITY

Set the RECORD QUALITY to LOW, NORMAL or
HIGH. This setting is the same for all channels.
•
With a higher Recording Quality, the
image will appear clearer during playback;
however more storage space will be
required on the Hard Drive to save the
video.
•
With a lower the Recording Quality, the
image will appear less clear during
playback; however less space storage
space will be required on the Hard Drive to
save the video.

EVENT REC DURATION

Set the Recording Duration when an EVENT
(sensor / motion) is detected on the system. Set
the duration to 5, 10, 15, 20, 25 or 30 seconds.

RECORD SCHEDULE SUBMENU

The Recording Schedule is based on a 24-hour
clock, and each hour can be set for a different
recording type.
23