STEP 1
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
PACkAGE CONTENTS
4 - Mounting Screws
1 - L224 Series DVR
1 - Quick Installation Guide
1 - Power Cord
1 - Software Application CD
1 - AC Power Adapter
1 - External I/O Port Pin Connector
1 - Owners Manual & Warranty
1 - Need Help Insert
1 - Remote Control
1 - IR Sensor
ACCL224VGA - Optional
VGA Converter Accessory
• Allows the L224 Series DVR to be
connected to a PC monitor
• Converts the signal to VGA
NOT INCLUDED - MONITOR, CAMERAS & BROADBAND ROUTER
3
Connect one end of ethernet cable (not supplied) to the DVR,
the other end to the broadband router (not supplied). Power
router and DVR ON if not already ON.
LAN (LOCAL AREA NETWORK)
TO YOUR COMPUTER
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.
L224 Series QSG-EN_R2 Page
Connect the cameras (not supplied) to the CH, CH2,
CH3, CH4 Video Inputs (BNC Inputs)
For Monitor connections, please refer to the owners manual
4
Connect the Power Supply to the DVR; the other end
to an electrical outlet.
WAN
(WIDE AREA NETWORK)
BACK OF THE DVR
BACK OF THE DVR
BACK OF THE DVR
POWER CORD
AC POWER ADAPTER
BUS IN ESS & HOM E SECURI TY
This set-up guide assumes you are connecting cameras (not included with this system)
to the Lorex DVR. Consult your DVR's owners manual for alternative DVR connection
and/or information to install a hard disk drive (HDD).
2
Connect the IR Sensor - To Operate Your DVR Remote
Control
This DVR unit comes with an IR Sensor on a wire that you
connect from the back of the unit and place in the front
panel of the DVR.
5
Press the POWER button to turn the DVR ON
Your DVR is now ready to use. Refer to the owner's
manual to learn how to record, playback, use the search
features and all other features available with this sys-
tem. Refer to Step 4 for Setting Up Remote Security
Monitoring.
BACK OF THE DVR
IR Sensor
FRONT OF THE DVR
www.lorexcctv.com