BYD F3DM Owner's Manual page 152

WARNING
!
When the car is supported only by
jack, no one is allowed to get under
the car.
Pay attention to the exhaust pipes
on both sides of car in using jack, to
avoid burns.
Replace Wheels
6. Remove wheel bolts and replace the
tire.
- 152 -
使用手册小330.indd 152
F3DM Owner's Manual
Take off the flat tire and put it aside
Move the spare tire to the installation
position, align the bolts to tire holes,
and then raise the tire until the top bolt
fits into the screw hole. Rotate the tire
and push it until all bolts can fit into
corresponding screw holes.
Before installation, please brush off all
corrosive materials on the installation
surface with a wire brush. During
installation, the metal area on the
installation surfaces must be in good
contact with each other, or the wheel
bolts may get loose, which may cause
the tire falling off while driving.
Reinstall Wheel Bolts
7. Put on the spare tire. Reinstall all
wheel bolts (tapered end inward) and
tighten them as much as you can by
hand. Push the wheel backward and
see if you can tighten them more..
2011-4-13 18:36:52