Connecting The Ipod; Using This Feature; Controlling The Ipod Using Radio Buttons - Chrysler Automobile User Manual

Connecting The iPod

Use the provided connection cable to connect an iPod to
the vehicle's 16–pin connector port located on the center
console. Once the iPod is connected and synchronized
to the vehicle's UCI system (iPod
seconds to connect), the iPod starts charging and is
ready for use by pressing radio switches, as described
below.
NOTE:
• You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
• If the iPod battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod connected
to the UCI system may charge it to the required level.

Using This Feature

By using the provided connection cable to connect an
iPod to the vehicle's UCI 16–pin connector port:
• The iPod audio can be played on the vehicle's sound
may take a few
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
• The iPod can be controlled using the radio buttons to
Play, Browse, and List the iPod contents.
• The iPod battery charges when plugged into the UCI
connector (if supported by the specific iPod device)

Controlling The iPod Using Radio Buttons

To get into the UCI (iPod ) mode and access a connected
iPod , press the "AUX" button on the radio faceplate.
Once in the UCI (iPod ) mode, iPod audio tracks (if
available from iPod ) start playing over the vehicle's
audio system.
UNDERSTANDING YOUR INSTRUMENT PANEL 211
4