Table of Contents
Advertisement
Maintenance
Changing the light bulb
The light bulb is placed to the left of
the needle. Place the rubber sheath
found in the accessory bag with its
deep hole around the bulb, Do not
turn the bulb, just pull
it
down to
remove the bulb.
When inserting, place the rubber
sheath with its shallow hole around
the new bulb, insert the bulb by
pushing
it
up.
Use light bulb designed as indicated
on the front of the machine.
Care of the machine
To keep your sewing machine
operating satisfactorily,
it
requires,
like other precision machines,
regular cleaning. No lubrication
(oiling) is needed.
Removing the stitch plate
Remove the presser foot and the
bobbin cover. Lower the feed teeth.
Place the stitch plate opener on the
brush. There is a recess at the rear
of the stitch plate. Insert the stitch
plate opener at the recess and turn.
Cleaning
When necessary, the feed teeth and
the bottom of the bobbin area must
be cleaned with the brush, which
you will find with the accessories.
Replacing the stitch plate
Replace the stitch plate about 5 mm
in front of the rear edge and push
it
backward. Replace the bobbin
cover.
z
CD
CD
User's Guide Iris
47
Hide quick links:
Advertisement
Table of Contents
