Maintenance - Husqvarna Viking E10 User Manual

MAINTENANCE

Attention:
Disconnect the machine from the
electricity supply by removing the
plug from the main socket. When
cleaning the machine, it must
always be disconnected from the
electricity supply.
Remove the stitch plate
Turn the handwheel until the needle
is fully raised. Open the hinged front
cover and unscrew the needle plate
screw withe the screw driver.(1)
Cleaning the feed dog
Remove the bobbin case and use
the brush supplied to clean the whole
area.(2)
Cleaning and lubricating the hook (3)
Remove the bobbin case. Snap the
two hook retaining arms (a) outwards.
Remove the hook race cover (b) and
the hook (c) and clean with a soft
cloth. Lubricate at the points (d) (1-2
drops) with sewing machine oil. Turn
the handwheel until the hook race
(e) is in the left position. Replace
the hook (c). Replace the hook race
cover and snap back the two hook
retaining arms. Insert he bobbin case
and bobbin and replace the stitch
plate.
Important:
Fabric lint and threads must be
removed regularly.
Your machine should be serviced
at regular intervals at your local
dealer.
29