Soft Key Display; How To Use Soft Keys - Toshiba Strata DK User Manual

LCD Operation
Soft Keys

Soft Key Display

Abbreviated Soft Key feature prompts display on the LCD above the
Control buttons (
example, you would press
and
CONF
If the Soft Key feature is activated at your station, incoming call information does not display
on your LCD while your station is busy. To display this information, you must either
disconnect the existing call or place it on hold.

How to Use Soft Keys

This section provides an example of how to use Soft Keys to make a Conference call by
adding a station to an outside call. See
that can be accessed with Soft Keys.
Example: Using Soft Keys to Make a Conference Call
While on an outside call (
prompts
ABR
not appear, then this feature was not assigned in system
programming).
Thirty seconds after the first digit of the telephone number is dialed,
the display changes to
incoming call, the
answer the call.
To Use Soft Keys to Make a Conference Calll
1. While on an outside
call, press
3DJH
(
Conference.
(Optional) You can
press
to terminate the
operation and return
to the outside call.
80
0RGH 3DJH
, , and
0RGH
6FUROO
for .
PGE
) you initiated, your LCD displays the
LINE 3
, , and during the first 30 seconds (if
CONF PGE
,
TRNS CONF
prompt appears immediately when you
TRNS
The outside call is placed on-hold.
CONF
) to initiate the
6FUROO
( )
RTRN
6FUROO
). In the following
for the function,
TRNS
"Soft Key Prompts" on Page 82
, and . If the call is an
PGE
TALK ON LINE 2
TRNS
3DJH
for
for a list of features
TALK ON LINE 3
does
ABR
ABR
TALK ON LINE 3
TRNS
LINE OR STATION?
LINE
Strata DK Digital Telephone 5/99
CONF PGE
CONF PGE
CONF PGE
STA. RTRN