Alert Signaling; Attendant Console Calling - Toshiba Strata DK User Manual

Alert Signaling

Alert Signaling enables you to send an alert sound to a predesignated (partner) station by
pressing a single button. This feature is based on the "buzz" key, where, for example, a
manager might alert his/her administrative assistant to enter the office.
You can have as many as four
other telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook) or
in the DND or Call Forward mode.
To send an Alert Signal
Press

Attendant Console Calling

Up to four Attendant Consoles can be installed per system. There can be up to three ways to
call the Attendant Console, depending upon system programming.
To call any attendant console
Press a [DN] +
To call a specific console
Press a [DN] + the
console's [DN].
To call all consoles for an emergency
Press a [DN] + the
emergency access
code
Strata DK Digital Telephone 5/99
$OHUW 6LJQDO
$OHUW 6LJQDO
. An alert tone sounds at the designated station.

. The call rings the Attendant Console's
rotate between the consoles if more than one console is installed.
The call rings the console's
System Administrator can provide the Attendant Console(s)
,Q'1
The call rings the

.
(s) to send or receive an Alert Signal to/from
,Q'1
s.
(PJU
button on all attendant consoles.
Features
Alert Signaling
 
button. Dial calls
(incoming [DN] button). Your
19