Change User Passcode By General User; Job Deletion By System Administrator - Xerox 550 Supplementary Manual

User Role
Allows you to select the privileges to give to the user. Select from [User], [System Administrator].
NOTE: The [User Role] button appears when you have enabled [Local Accounts] in [Authentication/Security
Settings].
Reset Total Impressions
Deletes all data tracked for the selected account.
Reset Account
Clears all settings and data for the selected account.

Change User Passcode by General User

This feature allows Authenticated Users (the procedure as described "User Authentication " ) to change the
registered passcode.
Note: This feature is only applicable to Local Authentication mode.
Authenticate by the procedure as described [User Authentication ]
1. Select [User Details Setup].
2. Select [Change Passcode] .
3. Enter the Current Passcode and select [Next].
4. On the Change Passcode screen, Select [Keyboard].
5. Enter a new passcode from 9 or more characters in [New Passcode], and select [Next].
6. In [Retype Passcode], select [Keyboard].
7. Enter the same passcode, and select [Save] twice.

Job Deletion by System Administrator

This feature allows only system administrators to delete the active jobs.
Deleting the Copy, Scan, Fax scan job
1. Press the red [Stop] button on the control panel.
2. On the touch screen, touch [Resume] to continue the job, or touch [Cancel] to cancel the job completely.
Deleting the printing Job
1. On the control panel, press [Job Status] button The Active Jobs tab displays.
37