Operation - JBL HTPS-400 Owner's Manual

O P E R A T I O N
The HTPS-400 contains a
signal-sensing auto turn-on/
turn-off circuit. This feature
will automatically turn the
subwoofer on when you turn
Toggle
Position Procedure
Off Power switch off
On Power switch on and playing program material
Auto Simply turn off your receiver/processor. The HTPS-400 will
turn off after approximately fifteen minutes. The subwoofer
will turn on when your receiver/processor begins playing again. signal present – Green
Output Level (Gain) – Normal (non-THX) Modes Only
Output
Level
(Gain)
Min. Max.
Output
Level
(Gain)
Min. Max.
Crossover Frequency – Normal (non-THX) Modes Only
The Crossover Frequency
adjustment determines
the highest frequency the
HTPS-400 will reproduce. It
allows a seamless transition
from the subwoofer to the
6
your system on with the power
switch in the "Auto" position
and begin playing any program
material. The subwoofer will
return to standby mode when
satellite speakers. Experiment
with this adjustment to
find the crossover frequency
that sounds best with your
speakers.
no signal is received for
approximately 15 minutes. The
power switch's "Off" position
is for vacation use only.
LED
Color
Red
Green
No signal present for more
than 15 minutes – Red;
Note: When the THX/Normal
switch is set to "THX," the
output (gain) control is
bypassed. Output level is then
adjusted at the THX processor.
Note: When the THX/Normal
switch is set to "THX," the
internal crossover is bypassed.
Crossover frequency is then
adjusted at the THX processor.