Page 1
JBL. For over 50 years, JBL has been involved in every aspect of musical and film recording and reproduction, from live performances to monitoring the recordings you play in your home, car, or office. We’re confident that the chosen will provide every note of enjoyment that you expected –...
read first! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To prevent electric shock, do not remove the grounding plug on the power cord, or use any plug or extension cord that does not have a grounding plug provided. Make certain that the AC outlet is properly grounded.
Speaker Placement The ideal placement for the HT PS300 is along the wall where the front speakers are installed. Because of the side firing design of the sub- woofer, it is recommended that the woofers be placed in a corner at least six inches away from the side walls.
To continue enjoying THX- quality bass response in a very large room, two or more HT PS300 subwoofers may be connected in series. For every 3000 cu. ft. of room volume, it is recommended that you use one HT PS300.
Right – – Output Level Stby 50Hz 120Hz Input Output Controls Bypassed Line Level Line Input High Level Inputs – – High Level Outputs – – Left Front Speaker – Crossover Frequency Phase Crossover Frequency Phase Right Front Speaker –...
Procedure Power switch off Power switch on and play program material Standby Simply turn off your receiver/processor. The HT PS300 will turn off after approximately five minutes. The subwoofer will turn on when your receiver/processor begins playing again. Output Level...
• System is on and a source is playing. • The HT PS300 is plugged in and “Power” is on. • If you are using the THX input, make sure the THX/ Normal switch is set to “THX.”...
Need help?
Do you have a question about the HT PS300 and is the answer not in the manual?
Questions and answers