Specify the Email address to which to send the log.
Select the destination Email address to which to send the log from
the addresses previously set in the Auto Dialers.
Press
.
SET
Select the printout method for the received document(s). This parameter
is only enabled if the RX or TX&RX is selected on the step 6.
: (INC) Prints only if the log was unable to be sent to the specified
SET
destination.
: (ON) Always prints.
SET
Press
to return to standby.
STOP
22
<01> panasonic
user@panasonic.com
RX LOCAL PRINT=1
1:INC. 2:ON (ALWAYS)
MMM-dd-YYYY 16:03
00%