Lockout Time Setting - Panasonic DP--8020E Operating Instructions Manual

Lockout Time Setting

This sets the time period (minutes) for the system lockout when the permitted number of logon attempts is
exceeded during the user authentication. Wait for the Lockout Time period to lapse before you are permitted to
logon to user authentication.
Note:
When the User Authentication function is enabled, you must login to the machine to change settings.
See the following sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Press , and login to the machine.
COPY
Press
FUNCTION
Press .
Enter the key operator code (3-digit), and then press
Note:
The key operator code is established by the system administrator.
A default value of the key operator code is "000".
Press .
Enter the time period for the system to lockout (
press .
SET
Press to return to standby.
STOP
.
SET
.
SET
to ), and then
READY TO COPY
COPIES:001
GENERAL PARAM. (0-9)
ENTER NO. OR
09 KEY OPERATOR MODE
ENTER PASSWORD=
KEY OPR. MODE(00-40)
ENTER NO. OR
37 LOCKOUT TIME
5 min. (1-60)
READY TO COPY
COPIES:001
19