Horizontal Airflow Direction Control - Panasonic CS-V18DKE Service Manual

8.7.2. Manual Control
• When the vertical airflow direction is set to Manual using the
remote control, the automatic airflow is released and the
airflow direction louver move up and down in the range
shown in the diagram.
• The louver can be adjusted by pressing the button to the
desired louver position.
• When stop operation using the remote control, the
discharge vent is reset, and stop at the closing position.
• During Anti-dew condensation prevention, Airflow Direction
Manual control angle change from 10°, 14°, 18°, 22°, 27° to
10°, 13°, 16°, 19°, 22° under Cooling and Soft Dry operation
mode.
8.8.

Horizontal Airflow Direction Control

8.8.1. Auto Control
• When the horizontal airflow direction is set to Auto using the
remote control, the vanes swings left and right for Cooling
and Soft Dry (0°-44°) as shown in the diagram.
• When stop operation using the remote control, the vanes is
reset, and stop at the reset position.
• During Cooling operation or Soft Dry operation, indoor fan
motor may stop to rotate at certain periods. At that
condition, the vanes will stop swinging and rest at 22°.
• During Anti-dew condensation prevention, Airflow Direction
Auto-control angle change from 0°-44° to 14°-30° under
Cooling and Soft Dry operation mode.
8.8.2. Manual Control
• When the horizontal airflow direction is set to Manual using
the remote control, the automatic airflow is released and the
airflow direction vane move left and right in the range shown
in the diagram.
The louver can be adjusted by pressing the button to the
desired vane position.
• When stop operation using the remote control, the vanes is reset, and stopped at reset position.
• During Anti-dew condensation prevention, Airflow Direction Manual control angle change from 0°, 11°, 22°, 33°, 44° to 14°, 18°,
22°, 26°, 30° under Cooling and Soft Dry operation mode.
Cooling and Soft Dry Operation
23
CS-V18DKE CU-V18DKE / CS-V24DKE CU-V24DKE