Table of Contents
Advertisement
8.
KEEP CHILDREN AWAY.
Do not let visitors contact tool.
All visitors should be kept safely away from work area.
9.
DON'T FORCE TOOL.
It will do the job better and safer at the rate for which it was intended.
10.
USE RIGHT TOOL.
Don't force small tool or attachment to do the job of a heavy-duty tool.
Don't use tool for purpose not intended – for example – don't use circular saw
for cutting tree limbs or logs.
11.
DRESS PROPERLY.
Do not wear loose clothing or jewelry.
They can be caught in moving parts. Rubber gloves and non-skid footwear are
recommended when working outdoors.
Wear protective hair covering to contain long hair.
12.
USE FACE OR DUST MAKE IF OPERATION IS DUSTY.
13.
SECURE WORK.
Use clamps or a vise to hold work. It's safer than using your hand and it frees
both hands to operate tool.
14.
DON'T OVERREACH.
Keep proper footing and balance at all times.
15.
MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories.
Keep handles dry, clean, and free from oil and grease.
16.
REMOVE ADJUSTING KEYS AND WRENCHES.
Keys and adjusting wrenches remove from tool before turning it on.
17.
STAY ALERT.
Watch what you are doing. Use common sense. Do not operate tool when you
are tired.
Tools should never be used by you if you are under the influence of alcohol,
drugs or medication that makes you drowsy.
18.
CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect
its operation. A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless otherwise indi-
cated elsewhere in this Instruction Manual.
Have defective switches replaced by authorized service center.
Do not use tool if switch does not turn it on and off.
5
Advertisement
Table of Contents
