Portable bluetooth speaker with passive bass radiators, 5200 mah battery for 15 hours of playtime and charging of other devices through dual usb, and ipx7 waterproof. (47 pages)
J SERIES LOUDSPEAKERS CONNECTIONS To connect the loudspeaker systems to the receiver or amplifier, use two- conductor insulated wire. Your JBL dealer can recommend suitable cables, or you can buy wire at most hardware or electronic stores. We recommend #16 AWG wire as a mini- mum size.
Page 4
part of the outer insulation; or a printed “+” marking on one of the insulators. It does not make any difference which of the two strands of wire go to (+) and (–) on the speakers and amplifier, as long as all speakers used in your system are connected identically.
Consult the owner’s manual of the amp/receiver for clarification. POWER HANDLING Thanks to their high efficiency, the JBL J Series Loudspeakers will pro- duce reasonable volume levels in a room of moderate size with very little amplifier power. However, using a...
Do not push on the center area of the grille. NOTE: The J50 grille is non- removable. Do not attempt to pry the grille from the cabinet as this will void your warranty. The rear...
Specifications Application High Frequency Dome Transducer Midrange Transducer (Nitrile Polymer Fibre Cone) Low Frequency Transducer (Nitrile Polymer Fibre Cone) Crossover Frequency Frequency Response (– 6 dB) Sensitivity (1 Watt/1 Meter) Nominal Impedance Recommended Amplifier Power* External Dimensions Height Width Depth External Dimensions Height Width...
Page 8
For this reason, JBL J Series Loudspeakers may differ in some respect from their published specifications and descriptions, but will always equal or exceed the original specifications unless otherwise stated.