FREQ (Hz)
L (mH)
80
8.0
100
6.4
125
5.1
150
4.2
200
3.2
NOTE: Chart values based on 4 Ohm speakers.
Figure 8
The marine amplifier can be configured for a mixed-mode operation on either channels
1/2 or 3/4 marine amplifier sections. The table provides component values to create a 6dB
per octave crossover at specified frequencies. Use components that have a +5% tolerance
and capacitors rated at 100V.
NOTE: Choose the same frequency for both LP and HP crossovers. Do not overlap
frequencies, as this may damage the marine amplifier.
Mixed-Mode System On Rear;
Full-Range Speakers On Front
C (uF)
497
398
318
265
199
- 10 -
English