Example : Receive To Memory - Panasonic Workio DP-C262 Function Manual

Example : Receive to Memory

Receive to Memory secures all received originals by storing them into memory.
To print the original(s) received in memory, the Key Operator must enter the correct password.
The procedure of setting Receive to Memory is described below.
For memory reception, refer to Receive to Memory in the Operating Instructions (For Facsimile and Internet
Fax) on the provided CD-ROM.
1
Press the Function key.
2
Select "Fax/Email Settings".
3
Select "04 Key Operator Mode".
4
Enter the Identification Code (4-digit),
and then select "OK".
50
5
Select "01 Fax Parameters".
6
Select (7 times).
7
Select "37 Receive to Memory".