Panasonic Workio DP-C262 Function Manual page 38

Fax Parameters
The contents of Fax Parameter may differ depending on the each country's regulation or specification.
No.
80-119 82 Quick Memory XMT
86 Ringer Volume
89 List Output Tray
95 Duplex Print
97 Special Tray
99 Memory Size
38
Parameter
Enable or disable the quick
memory transmission function.
• Invalid
Transmission starts after all
originals are scanned.
• Valid
Transmission starts when the
first page has been scanned
from the ADF into memory. If
there is more than one
destination, however, quick
memory transmission will not
work.
For details about quick
memory transmission, refer to
Transmitting a Document
Stored in Memory in the
Operating Instructions (For
Facsimile and Internet Fax) on
the provided CD-ROM.
Set the ringer volume.
Setting it to "Off" puts the ringer
on mute
Select an output tray for a printed
list.
Outer is available when the
optional Paper Transport Unit
is installed.
Enable or disable the duplex
printing of a received original.
For details about the duplex
printing of a received original,
refer to Print Reduction in the
Operating Instructions (For
Facsimile and Internet Fax) on
the provided CD-ROM.
Select the tray that will not be
used for printing received faxes.
Ex:
Exclude Tray 1 if colour
paper is loaded on Tray 1.
Check the status of optional
memory card.
(Base Memory + Optional
Memory)
Comments
Invalid, Valid
Off, Soft, Medium,
Loud
Inner, Outer
Invalid, Valid
NO. 1, NO. 2, NO. 3,
NO. 4
Selective Item Standard
Setting
Valid
Soft
Inner
Invalid