Panasonic Workio DP-C262 Function Manual page 42

Fax Parameters
The contents of Fax Parameter may differ depending on the each country's regulation or specification.
No.
120-159 151 Email Header FMT
152 Sub-Addr Routing
153 TSI Routing
154 Route Header FMT
155 Print Routed Doc
42
Parameter
Set the header information to print
when an Email is received.
(Normally used for
Troubleshooting. It shows the
path of the Email transmission
before arriving at your machine.)
• All
All the header contents are
printed.
• S/F/T
Only Subject, From, and To
are printed.
• Off
The header contents are not
printed.
Set whether to automatically
route a received fax or Email
using sub-address.
Set "Valid" for routing.
Set whether to route a received
fax to a telephone number or an
Email address pre-programmed
in the Address Book using the
originating fax's Numeric ID.
Set the contents of the "From"
field when transferring Email to a
computer or internet fax on the
network by routing.
• Origi
Sender information is printed.
• Rly Stn
Relay station information is
printed.
Set whether to print a received
original to be routed.
• Inc Only
An original is printed only
when the routing operation
has failed.
• Always
An original is printed whether
the routing operation has
succeeded or failed.
Comments
All,
S/F/T,
Off
Invalid, Valid
Invalid, Valid
Origi, Rly Stn
Inc Only, Always
Selective Item Standard
Setting
S/F/T
Invalid
Invalid
Origi
Inc Only