Operating Environment - LeCroy DA18000AC Instruction Manual

DA18000AC Differential Amplifier
Handle the probe with care as it has sharp tips that may cause bodily
injury if not handled properly.
WARNING
Do not use the amplifier in wet or explosive atmospheres.
WARNING
Do not use the amplifier if any part is damaged. All maintenance should
be referred to qualified service personnel.
CAUTION

OPERATING ENVIRONMENT

The DA18000AC Differential Amplifier is intended for indoor use and should be operated in
a clean, dry environment.
The design of the differential amplifier has been verified to conform to EN 61010-031 safety
standard per the following limits:
• Installation (Overvoltage) Category I: Refers to signal level which is applicable for
equipment measuring terminals that are connected to source circuits in which
measures are taken to limit transient voltages to an appropriate low level.
• Pollution Degree 2: Refers to an operating environment where normally only dry
non-conductive pollution occurs. Occasionally a temporary conductivity caused by
condensation must be expected.
1-2
###
DA18000AC-OM-E Rev A