Typical Characteristics - LeCroy DA18000AC Instruction Manual

Differential amplifier
Table of Contents

Advertisement

DA18000AC Differential Amplifier

TYPICAL CHARACTERISTICS

Typical characteristics are parameters with no guaranteed performance. Tests for typical
characteristics are not provided in the Performance Verification Procedure.
Bandwidth (System)
Rise Time (System)
(20-80%)
Propagation Delay
Gain Variation with Temperature
Noise, System
Noise, Amplifier only
100 kHz to 18 GHz
Input Match Differential Mode
Without ÷2 attenuators
With ÷2 attenuators
Input Match Common Mode
Without ÷2 attenuators
With ÷2 attenuators
Total Harmonic Distortion
(Amplifier only)
1. Measured with an swept sine wave source or step with FFT. Frequency of oscilloscope
channel subtracted from the measurement.
2. Measured with an SDA 18000 oscilloscope. Step optimized for eye diagram.
3. Measured with an SDA 18000 oscilloscope using SDEV function to remove offset.
8-2
1
100 kHz to 18 GHz
(with SDA 18000)
2
< 24 ps
7.3 ns
0.1% / °C
3
1 mV
(Referred to amplifier input)
rms
0.5 V
rms
CMRR
> 16 dB (See Figure 8-1.)
–14 dB (VSWR 1.5:1)
–19 dB (VSWR 1.25:1)
–6 dB (VSWR 3:1)
–12 dB (VSWR 1.7:1)
2.5% (at maximum input)
DA18000AC-OM-E Rev A

Advertisement

Table of Contents
loading

Table of Contents