Resetting To Factory Settings - Topfield CRC-2400 User Manual

You should set the Search Mode option to Auto at the first
service search after installing the digital receiver. The digital
receiver will search all available services with the automatic
search mode within the frequency range from the frequency
of the Start Frequency option to the frequency of the End Fre-
quency option. Symbol Rate stands for data transfer rate, and
QAM is a form of modulation used in digital broadcasting.
Broadcasting operators send their services in a symbol rate by
a modulation method. Perhaps you do not have to specify the
Symbol Rate and QAM Mode options since they are seldom
changed. However, you should set the QAM Mode option to
Auto for more certainty. You can specify the Start Frequency,
End Frequency and Symbol Rate options with the numeric
buttons if you want to change them.
To search only one frequency, set the Search Mode option to
Manual and specify your desired frequency at the Frequency
option with the numeric buttons.
It is most recommended that you should set the Search Mode
option to Quick Scan. With this option, you can search every
service rather quickly.
Um den Suchlauf zu starten, bewegen Sie sich zum Punkt
Suchlauf starten und bestätigen Sie den Menüpunkt mit
Digitalreceiver beginnt nun mit dem Suchlauf und listet dabei
die gefundenen Fernseh- und Radiosender auf. Je nach Bele-
gung der Kanäle im Kabelnetz, kann es einige Zeit dauern,
bevor die ersten Kanäle gefunden werden. Wenn der Such-
lauf beendet ist, wird Ihnen angezeigt, wieviele Fernseh- und
Radiosender gefunden wurden. Drücken Sie die
die Sender zu speichern.

3.2 Resetting to factory settings

The digital receiver maintains the following data:
• Services list
• Favourite list
3.2 Resetting to factory settings 17
£
¢ ¡
OK
3
£
¢ ¡
er
OK
Taste um