INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Install the washer on a horizontal solid floor.
• To reduce the risk of fire, this appliance must be fastened or otherwise secured to an
uncovered concrete floor.
C
A
UP
DOWN
Drain system
Never forget to install drain hose before operating your washer.
When opening the packing box, you will see a drain hose in the washer.
• Connect the drain hose to the drain outlet at
the back of the washing machine.
NOTES
• The opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
If the washer is installed on an unsuitable floor, it could make
considerable noise, vibration and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
• Earthed electrical outlet(B) is required with 20cm
B
(7.9 inches) of bottom back of washer cabinet.
• Hot and cold water faucets (C) must be within 1M
(39.4inches) of the upper back of the washer cabinet and
provide water pressure 4psi ~ 114psi.
Pump Model
4
Drain Outlet
Drain hose