Table of Contents
Advertisement
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the
function. Go to
Adjustment
displayed image to the screen.
When you connect a digital input signal using a digital (DVI, DP, mini DP, or HDMI) cable to your monitor, the
function will be disabled, because the monitor will automatically display the best image.
Auto Adjustment
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor
when you use the
Auto Adjustment
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you
can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from DVD-ROM. You could also use any other image, such
as the desktop of your operating system. However, we recommend that you use auto.exe.
As you run auto.exe, a test pattern displays.
2. Press any of the control keys to bring up the hot key menu. Select
menu.
3. Go to
and
Display
4. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select
and adjust the monitor until the noise disappears.
Clock
5. If you notice a horizontal noise, select
disappears.
Customizing the hot keys
The left 4 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions
for these keys.
1. Press any of the control keys to bring up the hot key menu, and press
main menu.
2. Go to
.
System
3. Select the custom key you want to change.
4. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Adjusting the display color
To adjust the display color, you can do one of the following:
• Apply the standard color settings from
• Change the display and color settings manually from the OSD menu. Settings you might want
to change are:
-
Color Temp. (see page 39)
-
Gamma (see page 40)
-
Color Gamut (see page 40)
and
Display
Auto Adjustment
function.
.
Auto Adjustment
Phase
Color Adjustment
to optimize the currently
Menu
and adjust the monitor until the noise
>
Color Mode
Auto
to enter the main
Pixel
to access the
Menu
.
How to adjust your monitor
33
Advertisement
Table of Contents
