Windows 95 - Asus PCI-L101 User Manual

Windows 95

Automatic Configuration
PCI computers automatically detect and configure PCI-compliant adapters while boot-
ing. The ASUS PCI-L101 PCI adapter IRQ level and I/O address are automatically set
by the BIOS each time you start your computer.
Start your computer to automatically configure the adapter. Configuration is complete
when Windows 95 starts. If your computer displays an error while booting, it may
require additional steps to configure.
Install Network Drivers from Diskette
Have your Windows 95 installation CD-ROM or disks available, as Windows 95 prompts
for them when you install the new adapter.
1. After you put the adapter in the computer, start Windows 95. The New Hardware
Found dialog box appears. If this box does not appear and Windows 95 starts nor-
mally, you may need to manually add the adapter.
2. Click "Driver from disk provided by hardware manufacturer," then click OK. The
Install From Disk dialog box appears.
3. Insert the ASUS Configuration and Drivers disk.
4. Specify A:\ (or B:\) as the path, then click OK.
5. Follow prompts for any Windows 95 installation disks and restart when prompted.
(If you installed from CD-ROM, the installation files are typically located at
D:\Win95, where D is your CD-ROM drive.)
After restarting Windows 95, you should be able to connect to your network by double-
clicking the Network Neighboorhood.
16
III. DRIVERS
ASUS PCI-L101 User's Manual