Table of Contents
Advertisement
Troubleshooting
If you can't connect to a server, first try the suggestions here, then turn to the Trouble-
shooting section if necessary.
•
Make sure you're using the drivers for this adapter. The driver filename contains
the letter B (for example, E100BODI.COM).
•
If you're replacing an existing adapter, make sure the LINK statement in your
NET.CFG is correct for the new adapter. For example, the LINK statement for a
NetWare client should be: "LINK DRIVER E100BODI"
•
Verify that the frame type in your NET.CFG file matches your network.
•
If setting up a server, check your LOAD and BIND statements.
•
Test the adapter by running diagnostics in Setup. Additional testing is available by
using a responder.
•
Check the README files.
Responder testing on the network (optional)
Setup can test the adapter more thoroughly if you have a responder on the network
while running the tests.
1. Go to a computer on the network with any EtherExpress adapter installed (except
EtherExpress 32 or EtherExpress 16 MCA).
2. Run the appropriate configuration program for the installed adapter and set it up as
a responder.
3. Return to the computer with the new adapter. Run Setup and make the new adapter
a sender. Test the adapter.
III. DRIVERS
ASUS PCI-L101 User's Manual
13
Advertisement
Table of Contents
