Connecting The Charger Unit; Preparing The Handset(S); Inserting And Charging The Batteries - Motorola ME4264 Series User Manual

Connecting the Charger Unit

Plug the mains adaptor into the wall socket . The charger unit is now ready to use.

Preparing the Handset(s)

Inserting and Charging the Batteries

Open the battery compartment, by pushing downwards on the cover.
Insert the 2 x AAA (600mAh/1.2V) Ni-MH re-chargeable batteries supplied,
observing the correct polarity.
CAUTION : PLEASE DO NOT USE ALKALINE OR NON- RECHARGEABLE
BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO
THE UNIT AND VOID THE WARRANTY.
If the batteries are inserted incorrectly
the handset will not operate and there is
also a possibility that the handset
may become damaged.
Push the battery cover back on until you hear it click into place.
Place the handset in the base station/charger unit to charge the batteries.
A confirmation beep and the charging indicator confirm that the handset is charging.
Note: Before first use, the batteries should be allowed to charge for at least 16 hours,
without interruption. If possible, only take the handset out of the base station when
charging is complete. This will help to guarantee optimum operation.
Note: To ensure no interruptions during the initial charging period, you may prefer to
connect the telephone line cord after charging so as not to be disturbed by any
incoming calls.
Note: To ensure the battery charging properly, clean the charging contacts on the
handset and charger with a soft, dry cloth once a month. Clean more often if the unit is
subject to grease, dust or high humidity.
11