Cambridge Audio Azur 840C Service Manual page 59

1. Make sure the 840C is switched off.
2. Repeat steps 1 to 9 for the PIC software above. Note: Please skip step 1 if you
already have the PC/Laptop installer program installed. Also make sure you
press and hold the Standby/On button while switching on the 840C via the
On/Off switch on the rear panel.
3. Select the "Load File" button corresponding to "DSP Software Download."
4. This will then bring up a browse menu. Please locate the latest DSP software
(the file extension is .BIN) for the 840C and press "Open."
5. The loader window will now display "File Loaded!" as shown below.
6. Now press the "Download Code" button corresponding to "DSP Software
Download" to start the process. "Programming DSP..." will now display on the
59