Information in this document has been carefully checked for accuracy at Technical Director the time of printing; however, Cambridge Audio's policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice. If you notice any errors please feel free to email us at: support@cambridgeaudio.com...
If your dealer is not damage the unit. equipped to perform the repair of your Cambridge Audio product, it can be returned by your dealer to Cambridge Audio or an authorised Cambridge This equipment must be switched off when not in use and must not be used unless Audio service agent.
Important safety instructions Please take a moment to read these notes before installing your 740C, Power cord protection as they will enable you to get the best performance and prolong the life The unit must be installed in a manner that makes disconnection of the of the unit.
azur 740C Rear panel connections Manufactured in an Power Incorporating Q5 ™ from: ISO9002 approved facility ANAGRAM Designed in London, England This device complies with TECHNOLOGIES part 15 of FCC rules azur 740C Upsampling Compact Disc Player Caution Risk of electric shock. Power Rating: 230V AC ~ 50Hz Do not open.
Front panel controls azur 740C Upsampling Compact Disc Player Open Play Skip Standby / On Menu Select Close Pause Stop Scan Standby/On Open/Close Switches the unit between Standby mode (indicated by dim power LED) Allows you to open and close the disc tray thus making it possible to load and On (indicated by bright power LED).
The 740C is supplied with an Azur Navigator remote control that Amp Control mode operates both this CD player and other Cambridge Audio Azur amplifiers. The 740A/C remote control comes with an Amplifier Insert the supplied AAA batteries to use.
Operating instructions Loading and unloading discs Repeating discs and tracks 1. Press the Standby/On switch. 1. Ensure that the disc is playing. 2. Press the Open/Close button. 2. Press the Repeat button on the remote control. ‘Repeat All’ will appear on the display. The whole disc will now be repeated until the 3.
azur 740C External digital sources Programming disc play To access external digital sources connected to the rear of the 740C, press the Select button (on front panel or remote) to change between 1. Ensure that a disc is loaded and the player is in Standby mode. CD playback, Digital Input 1 and Digital Input 2.
CD player setup The 740C has a custom-made display on the front of the unit showing Digital out dither the current status and allowing access to the 740C System Dithering is a process where pseudo random noise is added to a signal Configuration menus.
12 seconds, a CD player “Off” command is generated. S/N ratio, A weighted > 113dB A full code table for this product is available on the Cambridge Audio website at www.cambridge-audio.com. Total correlated jitter < 130pS Crosstalk @1kHz <...
Need help?
Do you have a question about the AZUR 740 C and is the answer not in the manual?
Questions and answers