Quick Reference; Quick Installation Tips; Using The Remote Control Unit - Sharp Aquos LC-60E77UN Operation Manual

QUICK REFERENCE
QUICK INSTALLATION TIPS
Using the Remote Control Unit .
B) The POWER indicator on the front of the
television lights GREEN.
• Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
• The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
IL-l
----..Jlj
It
I
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
press TV POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
30
0
_
1 _
30
0
I
1T(5m)
Use the remote control unit by pointing it towards the
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
~tl
POWER
' I D"
I
II
II
-
/)..
"""'" O"C
j
o
0
0
J
•.-:::::::::::.a.
'-------.::c.;...,;:.....::-.:..:~~:::'[
LC-60E77UN
LC-~77UM
(2-prong) (3-prong)
4
How to turn on the television for the first time.
A) Press POWER on the television.
'-=='==
="
\-_.C::::p"
I
AC outlet
I
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• This product must only be connected to a 120 V, 60 Hz,
grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage the
product and invalidate the warranty. (LC-65E77UM only)
rmJD
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3
Bundle the cords properly with the cable clamp.
1
Attach your antenna to the back of the television.
(See page 8.)
2
Connect the AC plug for the television into the AC
outlet.
POWER indicator
• Speakers cannot be detached from the TV.
• TV angle cannot be adjusted.
@-
7