Picture Menu - Sharp Aquos LC-60E77UN Operation Manual

On-Screen Display Menu
Picture Menu
ope
Setting
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
White balance can be adjusted between a maximum of
+30 and a minimum of -30 for each color temperature.
R Gain (La/HI): -30 through +30
G Gain (La/HI): -30 through +30
B Gain (La/HI): -30 through +30
ED
• For resetting all adjustment items to the factory preset
values, press
A/"
to select "Reset", and then press
ENTER.
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
e.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
ED
• For resetting all adjustment items to the factory preset
values, press
AI"
to select "Reset", and then press
ENTER.
,Color_.
(COlor~ -
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High:
t
Middle:
Mid-Low:
Low: White with reddish tone
Automatically adjusts the brightness of the screen.
Off:
The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
ED
• When set to "On", the Optical Picture Control (OPe)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
• When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
"1/
Picture
Example
• For resetting all Picture adjustment items to the factory
preset values, press
jjJ"
to select "Reset", press ENTER,
press ....
/~
to select "Yes", and then press ENTER.
:~·sel$rtea.·tWm:i '''''!'I'~~n:i!J:~
Backlight The screen dims The screen
briqhtens
Contrast For less contrast For more contrast
Brightness For less For more
briqhtness briqhtness
Color For less color For more color
intensity intensity
Tint
Skin tones Skin tones
become reddish become greenish
Sharpness For less For more
sharpness sharpness
1
Press
MENU
to display the
MENU
screen, and then
press
~/~
to select "Picture".
2
Press
J;..!T
to select a specific adjustment item.
• Select "Advanced" and then press ENTER to set
"C.M.S.-Hue", "C.M.S.-Saturation", "C.MS.-Value",
"Color Temp.", "Fine Motion Enhanced", "Active
Contrast", "Gamma Adjustment", "Black Level",
"Film Mode", "Digital Noise Reduction", "3D-Y/C" ,
"Monochrome" or "Range of OPC".
3
Press
,./T(or
~/~)
to select the desired setting,
and then press ENTER.
4
Press
MENU
to exit.
Adjusts the picture to your preference with the
following picture settings.
@>-
22