Sharp Aquos LC-60E77UN Operation Manual page 33

On-Screen Display Menu
5
Press ENTER to start checking the data in the
USB memory device.
6
During the data checking, "Checking" blinks.
7
Press ENTER to start updating.
• The screen becomes dark for a while until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
Example
• If the update has failed, check the file in the USB
memory device and try Software Update again.
Failed to complete update
Retry Software Update
If
system
Update falls again,
contact the customer service center
Example
8
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the 1V automatically
turns off and then turns on again.
Example
E!iim
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
• If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
• The current version of the 1V software and the version
of the update file on the USB memory device are
displayed. To update the 1V software with the update
file, select "Yes", and then press ENTER.
System software was
successfully updated
Remove the USB memory deVice
~
_____I
9
After the screen shown below is displayed, press
ENTER.
10
Remove the USB memory device.
@-
32