Pin Code - Ericsson DT290 User Manual

. i
ChangePIN
Z . i
Z . i
Z . i
DT290

PIN code

Your phone is initially provided with a pre-set PIN code (Personal
Identification Number). You should change this PIN code to a
personal PIN code to prevent misuse.
To change the PIN code
Route: Settings » PhoneLock » ChangePIN
Select.
Press.
: is displayed.
EnterOldPIN
Enter the current PIN code (default 0000) and press.
Either
EnterNewPIN:
case, you have entered a number that does not match the current
PIN code.
Enter the four digits of the new PIN code and press.
is displayed.
RepeatNewPIN
Enter the new PIN code again and press.
Either
New PIN accepted
Note the new PIN code for future use.
If you incorrectly enter a new PIN code three times in a row, your
phone leaves this menu option.
In other situations, if you enter an incorrect PIN code three times in
a row, your phone is blocked and
displayed. See section
phone.
or is displayed. In the latter
Wrong PIN
or
Wrong New PIN
PIN Blocked, Unblock?
"IPEI code" on page 6 to unblock your
Important
is displayed.
is
5