Sony DVP-NC650V Operating Instructions Manual page 26

by Lrronsd (Pm Logic) deco amplif iar. (receiver) m
This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic)
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a
Dolby Digital or DTS decoder, refer to page 22.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or
multichannel audio (Dolby Digital) discs.
This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The
surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer)
are used.
If your amplifier (receiver) has R and L audio input jacks only, use 0). If your amplifier
(receiver) has a digital input jack, use @.
WRecommended surround sound effects using this connection with your amplifier (receiver)
l
Dolby Surround (Pro Logic) (page 92)
.-*.
c
For
correct speaker setting location, please refer to the operating instructions of the amplifier (receiver)
SACD
audio signals are not output from a digital jack
26