Settings For The Sound (Audio Setup) - Sony DVP-NC650V Operating Instructions Manual

Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the
sound according to the playback and
connection conditions.
Select "AUDIO SETUP" in the Setup
Display. For details on using the display, see
"Using the Setup Display" (page 77).
The default settings are underlined.
n
AUDI0 ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the
audio
output level.
This function affects the
output of the
following jacks:
-LINE OUT L/R (AUDIO) l/2 jacks
-5. ICH OUTPUT jacks
-PHONES jack
Reduces the audio output level so
that no sound distortion occurs.
Select this when the playback
sound from the speakers is
BAUD10 DRC (Dynamic Range
Control) (DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the "AUDIO DRC" function. This affects the
output from the following jacks:
-LINE OUT L/R (AUDIO) l/2 jacks
-5. ICH OUTPUT jacks
-DIGITAL OUT (OPTICAL or COAXIAL)
jack only when "DOLBY DIGITAL" is set
to "D-PCM" in "DIGITAL OUT" (page
84).
-PHONES jack
STANDARD Normally. select this position.
TV MODE Makes the low sounds clear even
if you turn the volume down. It
is especially recommended
when you listen to the sound
using the speakers of the TV.
WIDE
RANGE
Gives you the feeling of being at
a live performance. When you
use high quality speakers, it is
even more effective.
n
AUDIO FILTER (except SACD)
Selects the digital filter to reduce noises
above the 22.05 kHz (Sampling frequency
(Fs) of the audio sources is 44.1 kHz), 24 kHz
(Fs is 48 kHz), or 48 kHz (Fs is above 96
kHz).
* There may be little effect by changing the digital
filter depending on discs or playback environment.
* There is no effect on SACDs.
continued I)
83