Hooking Up The Player; Step 1: Connecting The Video Cords - Sony DVP-NC650V Operating Instructions Manual

Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 15).
l
Plug cords securely to prevent unwanted noise.
l
Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns 0 through 0, according to the input jack on
your
TV monitor,
projector, or AV amplifier (receiver).
Audio/video cord
(supplied)
I
0
A
(yellow)
(yellow)
SACD/DVD player
OL
8
AUDIO
OR
TV,projector, AV
amplifier (receiver)
4
(green)
e
(blue)
(red)
TV,
S VIDEO cord
amplifier (receiver)
(supplied)
cord (not supplied)
TV, projector, AV
amplifier (receiver)
A: Signal flow