Setting Hdmi And Component Output Resolution; Setting Closed Captioning; Setting Fan Speed - Hargray DVR User Manual

myHARGRAY
DVR USER GUIDE
Using user menu

Setting HDMI and Component output resolution

You can use User Menu to set the HDMI and Component output resolution. To use
User Menu to set the output resolution, follow procedures in section Using User
Menu, to make the changes.
NOTE: Setting of HDMI and component output resolution may be disabled in User
Menu. You may need to use the middleware user menu to set the resolution. Please
refer to your service provider for details.

Setting Closed Captioning

You can use User Menu to control closed captioning. You can also use remote
control LANG button to control closed captioning. The setting made in both ways
is the same.
To use User Menu to set closed captioning, follow procedures in section Using User
Menu, to make the changes.
Please refer to section Closed Captioning for details of controlling closed captioning.
NOTE: Setting of closed captioning may be disabled in User Menu. You may need
to use the middleware user menu to control closed captioning. Please refer to your
service provider for details.

Setting Fan Speed

You can use User Menu to control the fan speed or turn off the fan at all. 3 fan speeds;
high, middle and low are provided. You can control the fan speed with fan noise level
which is acceptable to you. To ensure good heat dissipation, it is not recommended
to turn off the fan.
Follow procedures in section Using User Menu, to make the changes.
38