Remote Control; Loading Batteries; Controlling The Set Top Box - Hargray DVR User Manual

Loading Batteries

The remote control comes with AA-size batteries, which needs to be installed when
you first receive your system. When you replace old batteries, you should replace all of
the batteries. Use batteries of the same kind, for example alkaline or carbon zinc, and
do not mix batteries of different kinds. Alkaline batteries last longer than carbon zinc.
WARNING: Mixing old and new batteries or different types of batteries poses a fire
hazard.
To load batteries to remote control:
1. Press down on the battery cover's top latch and slide the cover off.
2. If you are changing out batteries, take out all of the old batteries.
3. Put the new batteries in. Make sure you match the plus ( "+" ) ends with the plus
markings on the battery case.
4. Slide the cover back into place.
Set Top Box uses InfraRed (IR) to receive remote control signals. IR signals travel only
short distances (40 feet or less), and cannot go through walls or other solid objects.
You must point the remote control to the Set Top Box, with no objects blocking the
line of sight.
Remote Controls

Controlling the Set Top Box

myHARGRAY
DVR USER GUIDE
32