myHARGRAY
DVR
USER GUIDE
Using user menu
To start the User Menu:
1. Press INPUT and then MENU in sequence within 1 second.
To set up a Feature:
1. Use remote control UP and DOWN arrow to select the feature you want to set.
The selected feature will be highlighted by a red rectangle.
2. Press OK, the feature will be highlighted in navy blue color.
3. Use remote control UP and DOWN arrow to loop through available choices.
4. Press OK again when your choice is selected.
5. If you have other features to set up, repeat the above procedures.
To Save your setup or Exit:
1. If you have made any setup and want to save the settings, select SUBMIT in the
User Menu. You will be notified the saving of your settings.
2. Select EXIT to quit the User Menu.
ATTENTION: If you exit the User Menu without doing the SUBMIT, your changes will
be lost and will not take effect.
NOTE: If you want to give up the changes, simply select EXIT.
37
Pressing "INPUT" and "MENU"
in sequence within 1 second